EC Type Examination Certificate (ATEX)

2. [13] Schedule [14] EU - TYPE EXAMINATION CERTIFICATE No. DEMKO 11 ATEX 153714 Rev. 4 00 - IC - F0056 - 1 – Issue 2 6 . 0 Accredited by DANAK under registration number 701 1 to certificatio n of produ cts. Page 2 of 2 [15] Description of P roduct The associated apparatus consists of 7 different model variants, intended fo r u s e as c harging and/or communication devices when connected to I.S. equipment. The connection of I.S. equipment to the associated apparatus must only be performed in a non - haza rdous location. Equipment included: Seven variants of the equipment, the type d e s i g nati ons and descript i ons of which are l isted below: Type: POWER CABLE (6.5 Vdc input) Type: COMMUNICATION CABLE (USB communications only) Type: POWER AND COMMUNICATION CABLE (USB communications and power) Type: VEHICLE POWER CABLE (12 Vdc or 24 Vdc i np u t ) Type : CRADLE CHARGER (6.5 Vdc input) T ype: CRADLE POWER AND COMMUNICATIONS (6.5 Vdc input and USB communications) Type: BLUET OOTH ENABLED POWER CAB LE ( 6.5 Vdc input) Temperature range The ambient temperature range is 0 ° C to +40 ° C. Electrical d at a U m : 2 50 V U o : 9.1 V Routine tests None [16] Descriptive Documents The scheduled drawings are listed in the report no. provided under item no. [ 8 ] on page 1 of this E U - Type Examination Certificate. [17] Spec i fic conditions o f use: Non e [ 18] Essential Health and Safety Requirements The Essential Health and Safety Requirements (EHSRs) covered by the standards listed at item 9. Additiona l i nformation The trademark will be used as the company identifier on the marking label. The ma nu f a c t urer shall inform the notified body concerning all modifications to the techn ical documentation as described in A nnex III to Directive 2014 / 34 / EU of the European Parliament and the Council of 26 February 2014 .

1. 00 - IC - F0056 -1 – I ss ue 26 .0 Accredited by DANAK under registration number 7011 to certification of products. Page 1 of 2 This certificate may only be reproduced in its entirety and without any change, schedule included. [1] EU- TYPE EXAMINATION CERTIFICATE  [2] Equipment or Protective System intended for use in Potentially Explosive Atmospheres Directive 2014 / 34 / EU [3] EU- Type Examination Certificate Number: DEMKO 11 ATEX 153714 Rev. 4 [4] Pr od uc t: Battery Charging & Communication Cables [5] Manufacturer: Crowcon Detection Instruments Ltd. [6] Address: 172 Brook Drive, Milton Park, Abingdon, Oxfordshire, OX14 4SD, UK [7] This product and any acceptable variation thereto are specified in the schedule to this certificate and the documents therein referred to. [8] UL International Demko A/S, notified body number 0539 in accordance with Article 17 of the Council Directive 2014 / 34 / EU of 26 February 2014 , certifies that this product has b ee n found to comply with the Essential Health and Safety Requirements relating to design and construction of products intended for use in potentially explosive atmospheres given in Annex II to the Directive. The examination and test results are recorded i n confidential report no . DK/ULD/ExTR10.0019/04 . [9] Compliance with the Essential Health and Safety Requirements has been assure d by compliance with: EN IEC 60079 - 0:2018 EN 60079 - 11 :20 12 [ 10] If the sign " X " is placed after the certificate number, it indicates that the product is subject to special conditions for safe use specified in the schedule to this certificate. [11] This E U- Type E xamination C ertificate relates only to the design and co n struction of the specified product . Further requirements of the Directive apply to the manufacturing process and supply of this product . These are not covered by the certificate. [12] The marking of the product shall include the following:  II (1) G [Ex ia Ga ] Certification Manager Jan - Erik Storgaard This is to certify tha t the sample(s) of the Product described herein (“Certified Product ”) has been investigated and found in compliance with the Standard(s) indicated on this Certificate, in accord ance with the ATEX Product Certification Program Requirements. This certificat e and test results obtained apply only to the product sample(s) submitted by the Manufacturer. UL did not select the sample(s) or determine whether the sample(s) provi ded were representative of other manufactured product . UL has not established Follow - Up Service or other surveillance of the product . The Manufacturer is solely and fully responsible for conformity of all product to all applicable Standards, specifications , re quir e ments or Directives. The test results may not be used, in whole or in part, in any other document without UL’s prior written approval. Date of issue: 2011 - 05 - 04 Re - issued: 2021 - 04 - 29 Notified Body UL International Demko A/S, Borupvang 5A, 2 7 5 0 Ball e rup, Denmark Tel. +45 44 85 65 65, i nfo.dk@ul.com , www.ul.com