TDS_230804_maxX_web_EN

1. www.mag-tecnomagnete.com Permanent-electro magnetic systems EN TECNOLIFT line - Magnetic lifting systems Hand controlled magnetic lifters

2. 2 | www.mag-tecnomagnete.com Hand controlled magnetic lifters Safe and handy lifting MaxX magnetic lifters are the ideal solution for handling any steel workpiece any steel workpiece whether rough or finished. Their compact size and low weight maximize the crane capacity through a range of models with lifting capacities (WLL) from 125 kg to 2000 kg and specific versions for round surfaces and thin material.

6. 6 | www.mag-tecnomagnete.com Hand controlled magnetic lifters Rotating the lever to the rest position draws the entire magnetic flux inside the MaxX lifter, leaving the workpiece demagnetized without any residual. In addition, the perfect balance of the magnetic fields North/ South inside the lifter prevents uncontrolled outflow of flux from the lifter body. The flux generated by the high-energy permanent magnets placed in the stator slots is added to those inside the rotor for a double magnetic force extremely powerful to lift any type of workpiece in complete safety. Double magnetic generator

7. 7 www.mag-tecnomagnete.com | Hand controlled magnetic lifters The path and intensity of the magnetic flux to clamp the workpiece to be lifted comes from a precise study on the angle of the stator magnets with that of the rotor. The result is the “smart” behavior of the lever which informs the operator immediately through its soft or hard rotation whether the application is safe or risky due to unsuitable operating conditions such as a high air gap, too little thickness, a partial coverage of the magnetic poles or a material that is poorly permeable to magnetism. If the operating conditions are unsafe, the lever will not allow the activation of the magnetic force A “Smart Lever” at your service for safe magnetization

3. 3 www.mag-tecnomagnete.com | Hand controlled magnetic lifters The polar geometry is designed to fit loads of all kinds perfectly with both flat and round surfaces while minimizing operating air gaps. The TG series maximizes the magnetic performance for lifting thin sheet metal and pipes. MaxX lifter for every need in manufacturing

12. Release September 2023 MAG-AUTOBLOK TECNOMAGNETE SpA Headquarter Via Nerviano 31 - 20045 Lainate (MI) - ITALY Tel: +39 02 937591 info@magtecnomagnete.com www.mag-tecnomagnete.com TECNOMAGNETE GmbH Germany - Austria Ohmstrasse 4 - 63225 Langen - GERMANY Tel.: +49 6103 750730 - Fax: +49 6103 7507311 Email kontakt@magtecnomagnete.com TECNOMAGNETE Inc. U.S.A. - Canada - Mexico 6655 Allar Drive - Sterling Hts, MI 48312 - USA Tel.: +1 586 276 6001 - Fax: +1 586 276 6003 Email infousa@magtecnomagnete.com TECNOMAGNETE SARL France Batiment C - 01200 VALSERHONE - FRANCE Tel.: +33 (0)4 50 56 06 00 - Fax: +33 (0)4 50 56 06 10 Email contact@magtecnomagnete.com

4. 4 | www.mag-tecnomagnete.com Hand controlled magnetic lifters The monoblock structure of the MaxX lifter is machined with high-precision details to ensure maximum magnetic efficiency and operational reliability. High-energy Neodymium permanent magnets are placed inside dedicated slots of the stator and inside the rotor core in order to be protected in case of shocks during use. The magnetic rotor rotates inside the magnetic stator always maintaining the same distance over time thanks to the precision machining, the use of bearings and a unique manufacturing process that involves the magnetization of the lifter once assembled. The final nickel-coating treatment protects the product against oxidation and the wear and tear of time. A design of excellence and a perfect constructive realization See 3D video

5. 5 www.mag-tecnomagnete.com | Hand controlled magnetic lifters The ball bearings located at the ends of the MaxX are an integral part of the monoblock and ensure smooth rotation of the activation lever and reliability over time . The handle - secure and ergonomic - is easy to grip even with working gloves to perform magnetization and demagnetization cycles. The hooking detail is designed for the firm and secure coupling with the lifting hook. The safety catch of the lever - simple but effective - ensures optimal operation even after years of work. Its position clearly shows the operator when the lever is placed in safety mode once the hoist is activated. The performance plates located on both sides are laser engraved on aluminum supports for durability. They clearly indicate performance on flat and round surfaces under operating conditions as a function of the quality of the contact (air gap). Each lifter displays its own serial number, the month and year of manufacture. The polar “V” geometry to suit flat and round surfaces. The Quality Control and testing are performed on all lifters MaxX during the various stages of production at our plant in Lainate Italy to guarantee the correct performance operation. The details make the difference

10. 10 | www.mag-tecnomagnete.com C Accessories MFB - Magnetic Fixed beam MVS - Magnetic Vertical System For handling bigger size loads using 2 hand controlled magnetic lifters. MFB fits all MaxX models using 5 predefined centers distance depending on the size of the load. For vertical handling of plates. MVS suits loads of various sizes by changing the position of the locking pins. MFB 500 Max lenght Max width Max load FLAT (WLL) Max load ROUND (WLL) MFB 2000 Max lenght Max width Max load FLAT (WLL) Max load ROUND (WLL) mm mm Kg Kg mm mm Kg Kg 2 MaxX 250 3000 1500 400 200 2 MaxX 500 3000 1500 800 400 2 MaxX 300 3000 1500 500 250 2 MaxX 600 3000 1500 900 450 2 MaxX TG 150 3000 1500 200 100 2 MaxX 1000 3000 1500 1.500 750 2 MaxX TG 300 3000 1500 500 250 2 MaxX 1500 3000 1500 2.000 1.000 2 MaxX 2000 3000 1500 2.000 1.000 MVS 250 MVS 500 MVS 1000 MaxX Model 250 - 300 500 - 600 1000 Max lenght mm 800 1000 1000 Max height mm 550 700 800 Max load Kg 180 350 700 A B C D Weight mm mm mm mm Kg MFB 500 1680 300 130 15 37 MFB 2000 1900 415 160 18 75 Dimensions and weights A B C D Weight mm mm mm mm Kg MVS 250 803 263 110 100 10 MVS 500 959 298 140 160 18 MVS 1000 1.058 330 140 160 19

11. 11 www.mag-tecnomagnete.com | MAXXI /P MAXXI /R MAXXI /TU MAXXI /TG MAXXI /TG MAXXI /P - MAXXI /TG MAXXI /R - MAXXI /TU Accessories MAXXI Fixed beams for handling plates, rounds and profiles. MAXXI /P for sheet and plate Model Equipped with 2 units Min. thick Width min. / max. Lenght min. / max. Max load mm mm mm Kg MAXXI 1000P MaxX 500 25 250 / 1500 1000 / 4000 1000 MAXXI 2000P MaxX 1000 40 300 / 2000 2000 / 5000 2000 MAXXI 3000P MaxX 1500 45 350 / 2000 2000 / 5000 3000 MAXXI /TG for thin sheet Model Equipped with 2 units Min. thick Width min. / max. Lenght min. / max. Max load mm mm mm Kg MAXXI 300TG MaxX 150TG 8 200 / 1500 1000 / 4000 300 MAXXI 600TG MaxX 300TG 10 250 / 1500 1000 / 4000 600 MAXXI /TG for beams and profiles Model Equipped with 2 units Min. thick Width min. / max. Lenght min. / max. Max load mm mm mm Kg MAXXI 300TG MaxX 150TG 8 300 / 1500 1000 / 6000 300 MAXXI 600TG MaxX 300TG 10 330 / 1500 1000 / 6000 600 MAXXI /R for round loads Model Equipped with 2 units Min. thick Width min. / max. Lenght min. / max. Max load mm mm mm Kg MAXXI 1200R MaxX 1500 30 45 / 500 2000 / 6000 1200 MAXXI /TU for pipes Model Equipped with 2 units Min. thick Width min. / max. Lenght min. / max. Max load mm mm mm Kg MAXXI 240TU MaxX 300TG 10 45 / 290 2000 / 6000 240 Dimensions and weights Model A B C D Weight mm mm mm mm Kg MAXXI 1000/P 906 460 250 800 50 MAXXI 2000/P 2.000 640 340 1.800 110 MAXXI 3000/P 2.000 640 382 1.800 170 MAXXI 1200/R 2.210 680 500 1.800 170 MAXXI 240/TU 1.070 480 250 800 50 MAXXI 300/TG 880 450 190 800 40 MAXXI 600/TG 906 470 250 800 50

9. 9 www.mag-tecnomagnete.com | 500 375 250 125 1500 1025 750 375 0 0.5 1.0 1.5 Carico (kg) Forza (daN) T rafer r o (mm) 600 450 300 150 1800 1350 900 450 0 0.5 1.0 1.5 Carico (kg) Forza (daN) T rafer r o (mm) 1000 750 500 250 3000 2250 1500 750 0 0.5 1.0 1.5 Carico (kg) Forza (daN) T rafer r o (mm) 1500 1125 750 375 4400 3300 2200 1100 0 0.5 1.0 1.5 Carico (kg) Forza (daN) T rafer r o (mm) 2000 1500 1000 500 5600 4200 2800 1400 0 0.5 1.0 1.5 Carico (kg) Forza (daN) T rafer r o (mm) 125 105 70 35 375 315 210 105 0 0.5 1.0 1.5 Carico (kg) Forza (daN) T rafer r o (mm) 250 125 800 600 400 200 0 0.5 1.0 1.5 Carico (kg) Forza (daN) T rafer r o (mm) 300 150 900 675 450 225 0 0.5 1.0 1.5 Carico (kg) Forza (daN) T rafer r o (mm) 300 225 150 75 900 675 450 225 0 0.5 0.75 0.25 1.0 Carico (kg) Forza (daN) T rafer r o (mm) 300 225 150 75 900 675 450 225 0 0.5 0.75 0.25 1.0 Forza (daN) Carico (kg) T rafer r o (mm) MaxX TG 150 MaxX TG 300 MaxX 1500 MaxX 2000 500 375 250 125 1500 1025 750 375 0 0.5 1.0 1.5 Carico (kg) Forza (daN) T rafer r o (mm) 600 450 300 150 1800 1350 900 450 0 0.5 1.0 1.5 Carico (kg) Forza (daN) T rafer r o (mm) 1000 750 500 250 3000 2250 1500 750 0 0.5 1.0 1.5 Carico (kg) Forza (daN) T rafer r o (mm) 1500 1125 750 375 4400 3300 2200 1100 0 0.5 1.0 1.5 Carico (kg) Forza (daN) T rafer r o (mm) 2000 1500 1000 500 5600 4200 2800 1400 0 0.5 1.0 1.5 Carico (kg) Forza (daN) T rafer r o (mm) 500 375 250 125 1500 1025 750 375 0 0.5 1.0 1.5 Carico (kg) Forza (daN) T rafer r o (mm) 600 450 300 150 1800 1350 900 450 0 0.5 1.0 1.5 Carico (kg) Forza (daN) T rafer r o (mm) 1000 750 500 250 3000 2250 1500 750 0 0.5 1.0 1.5 Carico (kg) Forza (daN) T rafer r o (mm) 1500 1125 750 375 4400 3300 2200 1100 0 0.5 1.0 1.5 Carico (kg) Forza (daN) T rafer r o (mm) 2000 1500 1000 500 5600 4200 2800 1400 0 0.5 1.0 1.5 Carico (kg) Forza (daN) T rafer r o (mm) MaxX 1000 125 105 70 35 375 315 210 105 0 0.5 1.0 1.5 Carico (kg) Forza (daN) T rafer r o (mm) 250 125 800 600 400 200 0 0.5 1.0 1.5 Carico (kg) Forza (daN) T rafer r o (mm) 300 150 900 675 450 225 0 0.5 1.0 1.5 Carico (kg) Forza (daN) T rafer r o (mm) 300 225 150 75 900 675 450 225 0 0.5 0.75 0.25 1.0 Carico (kg) Forza (daN) T rafer r o (mm) 300 225 150 75 900 675 450 225 0 0.5 0.75 0.25 1.0 Forza (daN) Carico (kg) T rafer r o (mm) Hand controlled magnetic lifters Flat loads Max load (WLL) (Kg) Min. thick (mm) Max length (mm) 1000 40 3000 Flat loads Max load (WLL) (Kg) Min. thick (mm) Max length (mm) 1500 45 3000 Flat loads Max load (WLL) (Kg) Min. thick (mm) Max length (mm) 150 8 1500 Flat loads Max load (WLL) (Kg) Min. thick (mm) Max length (mm) 2000 55 3000 Flat loads Max load (WLL) (Kg) Min. thick (mm) Max length (mm) 300 10 2000 Round loads Max load (WLL) (Kg) Min. thick (mm) Max length (mm) Ø max (mm) 400 25 3000 450 Round loads Max load (WLL) (Kg) Min. thick (mm) Max length (mm) Ø max (mm) 600 30 3000 500 Round loads Max load (WLL) (Kg) Min. thick (mm) Max length (mm) Ø max (mm) 50 8 1500 240 Round loads Max load (WLL) (Kg) Min. thick (mm) Max length (mm) Ø max (mm) 800 35 3000 600 Model Weight Dimensions (mm) (Kg) A B C D E F G H I L MaxX 125 3,5 119 69 79 79 66 30 37 145 130 132 MaxX 200 4,5 160 110 79 79 63 35 43 142 130 132 MaxX 250 6 190 143 79 79 63 35 43 142 130 132 MaxX 300 7,5 210 165 79 79 63 35 43 142 130 132 MaxX 500 15 250 199 106 101 88 52 60 189 174 176 MaxX 600 18 285 234 106 101 88 52 60 189 174 176 MaxX 1000 36 340 284 133 131 88 52 60 219 228 238 MaxX 1500 66 382 374 166 171 122 64 87 293 331 374 MaxX 2000 80 457 390 166 171 122 64 87 293 331 374 MaxX TG 150 6,8 191 143 79 91 63 35 43 154 130 132 MaxX TG 300 16 250 199 106 116 88 52 60 204 174 176 Round loads Max load (WLL) (Kg) Min. thick (mm) Max length (mm) Ø max (mm) 100 10 2000 290 Data sheet air gap (mm) air gap (mm) air gap (mm) air gap (mm) air gap (mm) load (Kg) load (Kg) load (Kg) load (Kg) load (Kg) Force (daN) Force (daN) Force (daN) Force (daN) Force (daN)

8. 8 | www.mag-tecnomagnete.com MaxX 125 MaxX 250 MaxX 200 MaxX 300 MaxX 500 MaxX 600 125 105 70 35 375 315 210 105 0 0.5 1.0 1.5 Carico (kg) Forza (daN) T rafer r o (mm) 250 125 800 600 400 200 0 0.5 1.0 1.5 Carico (kg) Forza (daN) T rafer r o (mm) 300 150 900 675 450 225 0 0.5 1.0 1.5 Carico (kg) Forza (daN) T rafer r o (mm) 300 225 150 75 900 675 450 225 0 0.5 0.75 0.25 1.0 Carico (kg) Forza (daN) T rafer r o (mm) 300 225 150 75 900 675 450 225 0 0.5 0.75 0.25 1.0 Forza (daN) Carico (kg) T rafer r o (mm) 125 105 70 35 375 315 210 105 0 0.5 1.0 1.5 Carico (kg) Forza (daN) T rafer r o (mm) 250 125 800 600 400 200 0 0.5 1.0 1.5 Carico (kg) Forza (daN) T rafer r o (mm) 300 150 900 675 450 225 0 0.5 1.0 1.5 Carico (kg) Forza (daN) T rafer r o (mm) 300 225 150 75 900 675 450 225 0 0.5 0.75 0.25 1.0 Carico (kg) Forza (daN) T rafer r o (mm) 300 225 150 75 900 675 450 225 0 0.5 0.75 0.25 1.0 Forza (daN) Carico (kg) T rafer r o (mm) 200 100 640 480 320 160 0 0.5 1.0 1.5 Carico (kg) Forza (daN) T rafer r o (mm) 125 105 70 35 375 315 210 105 0 0.5 1.0 1.5 Carico (kg) Forza (daN) T rafer r o (mm) 250 125 800 600 400 200 0 0.5 1.0 1.5 Carico (kg) Forza (daN) T rafer r o (mm) 300 150 900 675 450 225 0 0.5 1.0 1.5 Carico (kg) Forza (daN) T rafer r o (mm) 300 225 150 75 900 675 450 225 0 0.5 0.75 0.25 1.0 Carico (kg) Forza (daN) T rafer r o (mm) 300 225 150 75 900 675 450 225 0 0.5 0.75 0.25 1.0 Forza (daN) Carico (kg) T rafer r o (mm) 500 375 250 125 1500 1025 750 375 0 0.5 1.0 1.5 Carico (kg) Forza (daN) T rafer r o (mm) 600 450 300 150 1800 1350 900 450 0 0.5 1.0 1.5 Carico (kg) Forza (daN) T rafer r o (mm) 1000 750 500 250 3000 2250 1500 750 0 0.5 1.0 1.5 Carico (kg) Forza (daN) T rafer r o (mm) 1500 1125 750 375 4400 3300 2200 1100 0 0.5 1.0 1.5 Carico (kg) Forza (daN) T rafer r o (mm) 2000 1500 1000 500 5600 4200 2800 1400 0 0.5 1.0 1.5 Carico (kg) Forza (daN) T rafer r o (mm) 500 375 250 125 1500 1025 750 375 0 0.5 1.0 1.5 Carico (kg) Forza (daN) T rafer r o (mm) 600 450 300 150 1800 1350 900 450 0 0.5 1.0 1.5 Carico (kg) Forza (daN) T rafer r o (mm) 1000 750 500 250 3000 2250 1500 750 0 0.5 1.0 1.5 Carico (kg) Forza (daN) T rafer r o (mm) 1500 1125 750 375 4400 3300 2200 1100 0 0.5 1.0 1.5 Carico (kg) Forza (daN) T rafer r o (mm) 2000 1500 1000 500 5600 4200 2800 1400 0 0.5 1.0 1.5 Carico (kg) Forza (daN) T rafer r o (mm) 500 375 250 125 1500 1025 750 375 0 0.5 1.0 1.5 Carico (kg) Forza (daN) T rafer r o (mm) 600 450 300 150 1800 1350 900 450 0 0.5 1.0 1.5 Carico (kg) Forza (daN) T rafer r o (mm) 1000 750 500 250 3000 2250 1500 750 0 0.5 1.0 1.5 Carico (kg) Forza (daN) T rafer r o (mm) 1500 1125 750 375 4400 3300 2200 1100 0 0.5 1.0 1.5 Carico (kg) Forza (daN) T rafer r o (mm) 2000 1500 1000 500 5600 4200 2800 1400 0 0.5 1.0 1.5 Carico (kg) Forza (daN) T rafer r o (mm) 500 375 250 125 1500 1025 750 375 0 0.5 1.0 1.5 Carico (kg) Forza (daN) T rafer r o (mm) 600 450 300 150 1800 1350 900 450 0 0.5 1.0 1.5 Carico (kg) Forza (daN) T rafer r o (mm) 1000 750 500 250 3000 2250 1500 750 0 0.5 1.0 1.5 Carico (kg) Forza (daN) T rafer r o (mm) 1500 1125 750 375 4400 3300 2200 1100 0 0.5 1.0 1.5 Carico (kg) Forza (daN) T rafer r o (mm) 2000 1500 1000 500 5600 4200 2800 1400 0 0.5 1.0 1.5 Carico (kg) Forza (daN) T rafer r o (mm) 125 105 70 35 375 315 210 105 0 0.5 1.0 1.5 Carico (kg) Forza (daN) T rafer r o (mm) 250 125 800 600 400 200 0 0.5 1.0 1.5 Carico (kg) Forza (daN) T rafer r o (mm) 300 150 900 675 450 225 0 0.5 1.0 1.5 Carico (kg) Forza (daN) T rafer r o (mm) 300 225 150 75 900 675 450 225 0 0.5 0.75 0.25 1.0 Carico (kg) Forza (daN) T rafer r o (mm) 300 225 150 75 900 675 450 225 0 0.5 0.75 0.25 1.0 Forza (daN) Carico (kg) T rafer r o (mm) 125 105 70 35 375 315 210 105 0 0.5 1.0 1.5 Carico (kg) Forza (daN) T rafer r o (mm) 250 125 800 600 400 200 0 0.5 1.0 1.5 Carico (kg) Forza (daN) T rafer r o (mm) 300 150 900 675 450 225 0 0.5 1.0 1.5 Carico (kg) Forza (daN) T rafer r o (mm) 300 225 150 75 900 675 450 225 0 0.5 0.75 0.25 1.0 Carico (kg) Forza (daN) T rafer r o (mm) 300 225 150 75 900 675 450 225 0 0.5 0.75 0.25 1.0 Forza (daN) Carico (kg) T rafer r o (mm) 200 100 640 480 320 160 0 0.5 1.0 1.5 Carico (kg) Forza (daN) T rafer r o (mm) 125 105 70 35 375 315 210 105 0 0.5 1.0 1.5 Carico (kg) Forza (daN) T rafer r o (mm) 250 125 800 600 400 200 0 0.5 1.0 1.5 Carico (kg) Forza (daN) T rafer r o (mm) 300 150 900 675 450 225 0 0.5 1.0 1.5 Carico (kg) Forza (daN) T rafer r o (mm) 300 225 150 75 900 675 450 225 0 0.5 0.75 0.25 1.0 Carico (kg) Forza (daN) T rafer r o (mm) 300 225 150 75 900 675 450 225 0 0.5 0.75 0.25 1.0 Forza (daN) Carico (kg) T rafer r o (mm) Hand controlled magnetic lifters Flat loads Max load (WLL) (Kg) Min. thick (mm) Max length (mm) 500 25 2000 Flat loads Max load (WLL) (Kg) Min. thick (mm) Max length (mm) 125 20 1000 Flat loads Max load (WLL) (Kg) Min. thick (mm) Max length (mm) 600 25 2000 Flat loads Max load (WLL) (Kg) Min. thick (mm) Max length (mm) 250 20 1500 Flat loads Max load (WLL) (Kg) Min. thick (mm) Max length (mm) 200 20 1500 Flat loads Max load (WLL) (Kg) Min. thick (mm) Max length (mm) 300 20 1500 Round loads Max load (WLL) (Kg) Min. thick (mm) Max length (mm) Ø max (mm) 200 15 2000 400 Round loads Max load (WLL) (Kg) Min. thick (mm) Max length (mm) Ø max (mm) 50 10 1000 300 Round loads Max load (WLL) (Kg) Min. thick (mm) Max length (mm) Ø max (mm) 240 15 2000 400 Round loads Max load (WLL) (Kg) Min. thick (mm) Max length (mm) Ø max (mm) 100 10 1500 300 Round loads Max load (WLL) (Kg) Min. thick (mm) Max length (mm) Ø max (mm) 80 10 1500 300 Round loads Max load (WLL) (Kg) Min. thick (mm) Max length (mm) Ø max (mm) 120 10 1500 300 A complete range for all needs air gap (mm) air gap (mm) air gap (mm) air gap (mm) air gap (mm) air gap (mm) load (Kg) load (Kg) load (Kg) load (Kg) load (Kg) load (Kg) Force (daN) Force (daN) Force (daN) Force (daN) Force (daN) Force (daN)