TDS - ENG-VECTACO-Guardrail-with-wall-fixture-system-FP-20190523

1. ALSOLU - 89 rue Florent Evrard, 42100 Saint-Etienne - FRANCE Tél : +33 (0)4 77 47 45 00 - Fax : +33 (0)4 77 47 45 01 - Mail : devis@alsolu.com - Site web : www.alsolu.com 20190523 PRODUCT DATA SHEET VECTACO ® > COLLECTIVE PROTECTION – GUARDRAILS > GUARDRAIL WITH WALL FIXTURE SYSTEM Ref.: VA:VAD GUARDRAIL WITH WALL FIXTURE SYSTEM STANDARD EN ISO 14122-3 Straight upright 30° inclined upright Curved upright Folding upright With wall fixture system VA-D1 VA-D2 VA-D3 VA-I1 VA-I2 VA-I3 VA-I4 VA-C1 VA-C2 VA-C3 VA-C4 VA-R1 VA-R2 With wall fixture system with offset VAD-D1 VAD-D2 VAD-D3 VAD-I1 VAD-I2 VAD-I3 VAD-I4 VAD-C1 VAD-C2 VAD-C3 VAD-C4 VAD-R1 VAD-R2 1: handrail / 2: handrail + knee rail / 3: handrail + knee rail + plinthe / 4: handrail + 2 knee rails + toe board REFERENCES The VECTACO ® VA / VAD guardrail is a collective fall protection system intended to protect non-public roofs. Its design allows a quick and easy installation thanks to its handrails and knee rails with narrowed ends. The USE > Economic > Simple and fast assembly thanks to its interlocking handrails and knee rails with swaged ends, easy to nest > Handrails and knee rails in lengths of 3 m, conditioned by 7 to facilitate their distribution and their installation on flat roofs > Available in stock, short lead time A D VANTAGES VECTACO ® guardrail with wall fixture system is fixed inside or outside the parapet. When there is an offset (roof, masonry, etc.), we offer a wall fixture system with offset of 60 mm. For a larger offset, we offer tailor-made solutions with offset versions using a spacer or a post (see options). With 60 mm offset Ref.: 02876 With no offset Ref.: 02877

2. ALSOLU - 89 rue Florent Evrard, 42100 Saint-Etienne - FRANCE Tél : +33 (0)4 77 47 45 00 - Fax : +33 (0)4 77 47 45 01 - Mail : devis@alsolu.com - Site web : www.alsolu.com 20190523 PRODUCT DATA SHEET VECTACO ® > COLLECTIVE PROTECTION – GUARDRAILS > GUARDRAIL WITH WALL FIXTURE SYSTEM Ref.: VA:VAD GUARDRAIL WITH WALL FIXTURE SYSTEM EXAMPLES OF APPLICATIONS TECHNICAL CHARACTERISTICS - Matériau: aluminium - Finishing: raw, anodized or powder coated on request (RAL colours) - Fixation: 2 x M10 plugs - Available with upright: straight, inclined, curved and folfing - Conformity: EN ISO 14122-3 december 2007 - Certificate: AT5890779-1 AT5791764-5 AT5791764-4 With no offset: simple and economic base With 60 mm offset: base allowing the passage of the covering or other obstacles . DIMENSIONS - Two versions of available wall lamps: For a larger offset, we offer tailor-made solutions with offset versions using a spacer or a post (see options). Dimensions of the bases Dimensions of the uprights Straight Inclined Curved Folding 1100 mm 542 mm 540 mm 840 mm 500 mm 500 mm 489 mm 474 mm With 60mm offset Ref.: 02876 132 mm With no offset Ref.: 02877 110 mm 75 mm 100 mm 50 mm 2 X Ø12 80 mm 8 mm 100 mm 50 mm 2 X Ø12 60 mm 110 mm 75 mm Page2

3. ALSOLU - 89 rue Florent Evrard, 42100 Saint-Etienne - FRANCE Tél : +33 (0)4 77 47 45 00 - Fax : +33 (0)4 77 47 45 01 - Mail : devis@alsolu.com - Site web : www.alsolu.com 20190523 PRODUCT DATA SHEET VECTACO ® > COLLECTIVE PROTECTION – GUARDRAILS > GUARDRAIL WITH WALL FIXTURE SYSTEM Ref.: VA:VAD GUARDRAIL WITH WALL FIXTURE SYSTEM Page3 ASSEMBLY RECOMMENDATIONS - Minimum height of the parapet without offset: 120 mm - Minimun height of the parapet with offset: 120mm + 40mm (clim down on covering/flashing) which gives 160mm - Drilling at least 75 mm from the top of the parapet - Maximum inter-axial between uprights: 1500 mm - Adjustable angle for handrails and knee rails - Handrail and knee rails with swaged ends - Assembly through HC and self-drilling screws - Obligatory toeboard if the parapet ≤ 100 mm - Distance piece for a 95 mm offset Ref.: VAC04 x1 - Distance piece for a 116 mm offset Ref.: VAC04 x2 Distance parapet edge Solution Zinc Model Stainless steel Model A4 A ≥ 50 mm Chimical 280ml CHIMFORT cartridge Rods ECO ZN Rods M10 X 110 344790 344826 280ml CHIMFORT cartridge Rods ECO INOX M10 X 110 344790 344960 A ≥ 60 mm Mechanical Baraco CRACK Bolts FM 753 M10 x 90 344294 Baraco CRACK Bolts FM 753 A4 M10 x 90 344100 A ≥ 75 mm Mechanical Baraco Bolts FM 753 M10 x 90 344059 Baraco Bolts FM 753 A4 M10 x 90 344245 Table given as a guide for concrete C 20/25. *Etanco fasteners (provided upon request) - 1 cartridge CHIMFORT for 20 fixations; usable with standard silicone gun. 2 M10 plugs on parapet non-cracked concrete C 20/25. CHOICE OF FIXATIONS* ON CONCRETE SUPPORT OPTIONS RECOMMENDED USE - Technical manuals provided on delivery and available on the extrane - For the storage of aluminum products, it is important to store packaged packages in the shelter and dry. - When installing folding guardrail, a Vectaline ® lifeline is obliga - tory to secure the movement of the installers. Attention before any use, refer to the corresponding technical manuals. - Distance piece for a tailor-made offset 180 mm 140 mm 20 140 mm 112 mm 14 14 tube Ø100 A + 72 A = 950max 20 150 75 100 50 167 2 x Ø 12 95 1x VAC04 95 150 75 100 50 188 116 2 x Ø 12 2x VAC04 116